Acura MDX User Manual

112
uuIndicatorsuMulti-Information Display (MID) Warning and Information Messages
Instrument Panel
Message Condition Explanation
●
Appears when you try to change the gear position
without depressing the brake pedal.
●
Depress the brake pedal, then select a shift button.
●
Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.
●
Release your foot off the accelerator pedal, then select a
shift button.
●
Appears when the (P button is pressed while the
vehicle is moving.
●
Appears if you change the gear position to (R while the
vehicle is moving forward, or to (D while the vehicle is
reversing.
●
Make sure that the vehicle comes to a stop before
operating the select button.
●
Appears when you set the power mode to ON without
fastening the driver’s seat belt.
●
Appears when you change the gear position after (P
has been automatically selected with the driver’s door
open, the driver’s seat belt unfastened, then the brake
pedal is released.
●
Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 467
●
Appears when you press the (P button but it is not
engaged due to low ATF temperature.
●
Depress the brake pedal until this message disappear.
18 ACURA MDX E-AWD-31TRX6100.book 112 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分

Acura MDX Specifications

General

Brand	Acura
Model	MDX
Category	Automobile
Language	English