115
uuIndicatorsuMulti-Information Display (MID) Warning and Information Messages
Continued
Message Condition Explanation
●
Appears if there is a problem with the Auto high-beam.
●
Manually operate the headlight switch.
●
If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
●
Appears if the temperature inside the camera is too
high and either the auto high beams are in operation or
the headlight switch is turned to AUTO.
●
Use the climate control system to cool down the
camera.
●
Goes off - The camera has cooled down. To resume
the system, turn the headlight switch to AUTO.
2 Front Sensor Camera P. 475
●
Appears when the area around the camera is blocked
by dirt, mud, etc. Stop your vehicle in a safe place, and
wipe it off with a soft cloth.
●
May appear when driving in bad weather (rain, snow,
fog, etc.)
●
Have your vehicle checked by a dealer if the message
comes back on after you have cleaned the area around
the camera.
●
Appears after the 12-volt battery charging system
indicator comes on.
●
Your vehicle has less ability to accelerate and may be
harder to start on an incline.
●
Contact a dealer immediately.
●
Appears if there is a problem with the acoustic vehicle
alerting system.
●
Have your vehicle checked by a dealer immediately.
18 ACURA MDX E-AWD-31TRX6100.book 115 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分
To Next Page
Loading...
Need help?
General
