628
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
*
12. Apply the repair notification label to the
flat surface of the wheel.
u The wheel surface must be clean to
ensure the label adheres properly.
1. Apply the speed restriction label to the
location as shown.
2. Drive the vehicle for about 10 minutes.
u Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.
Repair Notification Label
■
Distributing the Sealant in the Tire
18 ACURA MDX E-AWD-31TRX6100.book 628 ページ 2017年11月10日 金曜日 午前10時21分