633
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
*
12. Turn off the kit.
u Check the pressure gauge on the air
compressor.
u If overinflated, press the pressure relief
button.
13. Unplug the kit from the accessory power
socket.
14. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
15. Press the pressure relief button until the
gauge returns to 0 psi (0 kPa).
16. Repackage and properly stow the kit.
18 ACURA MDX E-AWD-31TRX6100.book 633 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分
To Next Page
Loading...
