Acura MDX - Page 87

85
uuIndicatorsu
Continued
Instrument Panel
Indicator Name On/Blinking Explanation Message
Brake System
Indicator (Amber)
●
Comes on for a few seconds
when you set the power mode to
ON, then goes off.
●
Comes on if there is a problem
with a system related to braking
other than the conventional
brake system.
●
Comes on if there is a problem
with the electric parking brake
system.
●
Comes on if there is a problem
with the cooperative control with
regenerative braking, the electric
servo brake system, or the hill
start assist system.
●
Comes on while driving - Have your vehicle
checked by a dealer.
●
Stays on constantly - Avoid high speeds and
sudden braking. Take the vehicle to a dealer
immediately.
●
With this indicator on, your vehicle still has
normal braking ability.
●
Comes on if there is a problem
with the automatic brake hold
system.
2 Automatic Brake Hold P. 521
U.S.
Canada
(Amber)
U.S.
Canada
U.S.
Canada
18 ACURA MDX E-AWD-31TRX6100.book 85 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分