EasyManuals Logo

Acura NSX 2020 Service Bulletin

Acura NSX 2020
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
QUIET: EV Mode and Auto Idle Stop are enabled and maximized based on SOC level.
SPORT: Linear response. EV Mode and Auto Idle Stop are still available. Sporty driving.
SPORT+: Maximum response. EV Mode and Auto Idle Stop are disabled. Maximum engine note channeled
to cabin.
TRACK: Linear response. EV Mode and Auto Idle Stop are disabled. Maximized acceleration.
The selected mode appears on the driver information interface, and each mode looks different.
Test-drive the vehicle (if allowed by dealer and/or client) to check out the various characteristics (response, suspension,
steering, sound) under each mode.
Automatic Brake Hold System
This vehicle comes with an automatic brake hold system that keeps the rear brakes applied after releasing the brake
pedal until you press the accelerator pedal. When using this system, make sure the ignition is turned to ON and your
seat belt is buckled.
22.1. To turn on the system, press the BRAKE HOLD button. The BRAKE HOLD indicator in the instrument panel
comes on. The system is now turned on.
22.2. With the SBW shifter in Drive or Neutral, press the brake pedal and come to a complete stop. The HOLD indicator
in the instrument panel comes on. Braking is kept for up to 10 minutes. Release the brake pedal after the
indicator comes on.
22.3. To cancel the system and start moving, press the accelerator pedal. The HOLD indicator goes off.
Page 22 of 25

Other manuals for Acura NSX 2020

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acura NSX 2020 and is the answer not in the manual?

Acura NSX 2020 Specifications

General IconGeneral
BrandAcura
ModelNSX 2020
CategoryAutomobile
LanguageEnglish

Related product manuals