Vehicle Exterior
4. Fit Vehicle on a Lift
Due to its high-performance design and sporty dimensions, fitting this vehicle on a conventional lift takes special
attention. This chart shows you the approximate size of the vehicle’s footprint.
To fit the lift arms under the vehicle without damage, you need to increase the ground clearance using ramps. Here is
how to fit the vehicle on a two-post electrical lift using ramps.
4.1. Center the vehicle on the lift, and mark the wheel base on the floor with tape.
4.2. Back up the vehicle, and position the ramps according to the wheelbase markings.
Page 8 of 25
To Next Page
Loading...
