SETTING THE ALARM:
1) Hold ALARM for 3 seconds.
2) The hour number(s) flash. Press+ or - to enter the desired hour. Press
ALARM to confirm the hour setting.
3) The minute number(s) flash. Press+ or - to enter the desired minute. Press
ALARM to confirm the minute setting.
To view the alarm time, press the ALARM button during the normal operating mode.
Alarm time will display for five seconds. Then, the current time is displayed.
To Turn the Alarm On and Off: press the + button during the normal operating mode.
To Turn off the Alarm for One Day: To turn the alarm off for one day, press the
ALARM button when the alarm sounds
Snooze:
When the alarm sounds, press the SNOOZEbutton to trigger the snooze feature. The
alarm is silenced for five minutes. Then, it will sound an alarm again.
MIN/ MAX MEMORY:
Press the MEMORYkey to view the maximum values (Inside/ Outside Temperature and
Humidity) for 5 seconds. Press the MEMORYbutton again to view the minimum memory.
The memory will automatically refresh every 24 hours.
NOTE:The air pressure record will not be cleared manually, but instead will be cleared
automatically every 12 hours.
8 MULTIPLE WIRELESS SENSORS
The main unit supports up to three wireless sensors. Each additional wireless sensor
must be designated a different channel number. Assigning different channel numbers
differentiate each sensors temperature and hygrometer readings for the main units'
display.
Additional wireless sensors are sold seperately. Call 1·800·556·2548 to order.
1) Open each sensor by separating the front and back pieces
2) Install batteries if necessary. See section 3.
3) Use the interior slide switch to select a channel -1, 2, or 3.
4) Choose Celsius or Fahrenheit with the C/F button, for the sensor display.
5) With the Mode button choose what you want the sensor display to show:
Temperature only,
Humidity only, or
Temperature and humidity, alternating.
6) Press the TX button to send a signal to the main unit.
7) Snap the front and back pieces together.
8) Mount the sensor. See section 4 for placement of the remote sensor unit.
8
9 PRODUCT SPECIFICATIONS MODEL#00593W
MEASUREMENT RANGE:
Indoor main unit
Outdoor/Indoor humidity
Wireless sensor
Barometer
Channel
Transmission
Resolution
Clock
Batteries
0° C to+ 50° C (+32° F to +122° F)
20%-99% RH
-20° C to +700 C (-40 F to +1580 F)
900 to 1050 mb/hPa
maximum of three wireless sensors
up to 30M (100 ft.) open area, RF434 MHz
0.1°for temperature, 1% for humidity, 1hPa mb for
pressure
WWVB radio-controlled, quartz back-up
AA x 2 alkaline for main unit; AAA x 2 alkaline for
wireless sensor
NOTE:Thiswireless weather clock is built with random security code technology. The
main unit "learns" the random security code of the wireless sensor without interference
from a neighbor who may be using the same type of sensor under the same channel
setting.
Do not return product to retail store. For Technical Assistance and
product return Information, please call Customer Care:
877-221-1252
HOURS: Monday through Friday from 8:00 a.m. to 4:45 pm CST.
9
To Previous Page
Loading...
