Set Always-On Connection
Your computer must always be on with an internet connection to share sensor readings with My AcuRite and Weather
Underground and to allow scheduled data transfers. In addition, the PC Connect software must always be open and
can be minimized.
If your computer enters sleep mode, the Weather Sharing and scheduled Data Transfers do not function. You can set
PC Connect to prevent your computer from going into sleep mode by enabling the Always-on connection setting.
How to set an always-on connection
1. From the Always-on connection section, select the check box Prevent computer from going into sleep mode.
A check mark appears in the check box when enabled.
To Next Page
Loading...
