EasyManua.ls Logo

Ada MB-1 - Page 17

Ada MB-1
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ADA MB-1 owners manual version 2
HI MID Semi parametric type EQ, +/- 14dB @570Hz
- 1680Hz.
HI Shelving type EQ, +/- 14dB @ 1800Hz+
CHORUS Adjusts chorus sweep depth and sweep rate.
EFFECTS LOOP Allows choice of effect loop "A", "B", "A+B", or
off.
EDIT Places the MB-1 into Edit mode. The display
reads "Edit" until a parameter is selected.
Display then shows the value of he selected
parameter. Use the up and down arrows to
set the value of the selected parameter. If you
decide not to edit the current program, but
you've already pressed the EDIT button, you
may exit the edit mode by pressing EDIT
again. NOTE: A flashing EDIT LED indicates
that the program has been edited. A solid
EDIT LED indicates that the program does
not differ from the one called up to be edited.
STORE Places the MB-1 into Store mode. Stores
any current or edited program to any internal
program number. Press STORE button
followed by a program number. LED indicates
Store mode is engaged. LED turns off when
storage is complete. If you decide not to store
the current program, but you've already
pressed the STORE button, you may exit the
Store mode by pressing STORE again.
DICTIONARY
The MB-1’s hidden commands may be reviewed at any time while in play mode by pressing
and holding the BANK button in combination with the desired function's command number
button. We call this feature "Dictionary mode" . To view the MB-1's hidden commands in
Dictionary mode:
1. Press the BANK button and while holding the BANK button down press the number
button which corresponds to the command you wish to view.
2. The display will show the hidden command.
The hidden commands and corresponding number buttons are as follows:
BANK + 1 = LoAd PrESEtS
BANK + 2 = LoAd 1 to 1
BANK + 3 = SEt CodE
BANK + 4 = C-C LAtching on/oFF
BANK + 5 = SEnd CurrEnt
BANK + 6 = SEnd ALL
BANK + 7 = Edit C-C PALLEt
BANK + 8 = S-E ProtECt oFF/ on
BANK + 9 = ADA MESSAGE
BANK + 0 has no function
NOTE: To execute one of the hidden commands, press the STORE button prior to pressing
the BANK and number button.
Page 17 of 22

Related product manuals