ADA MB-1 owners manual version 2
SPECIFICATIONS
EQ: LO Shelving type, +/- 14dB @ 50Hz; LO MID Semi Parametric type,
+/- 14dB @ 54Hz-166Hz; MID Semi Parametric type, +/- 14dB
@
170Hz-
545Hz; HI MID Semi Parametric type, +/- 14dB @ 570Hz-
1680Hz; HI Shelving type, +/- 14dB @ 1800Hz+.
TUBE
COMPLEMENT: Three stages of gain using two, low noise 12AX7A.
MIDI: Channel 1-16, OMNI, OFF; Program change: External 0-128, Internal
1-256; MIDI Mapping, System Exclusive Dump and Load.
CHORUS: Depth 0 (none) to 100, Speed 0.1 sec. to 10 sec.
INPUT: 1/4" phone jack, high impedance (1 meg ohm) wide range.
OUTPUT: Full range: 1/4" phone jack line level. Bi-amp: Hi and Low
1/4"phonejackslinelevel. Direct: Balanced XLR, assignable pre or post,
ground (pin 1) liftable.
EFFECT LOOP: Two parallel independently assignable in/out with independent send
and return level control.
COMPRESSOR: Selectable threshold, ratio (1:1 to 40:1), and gain.
CONTOUR: Six selectable filter curves for each voice (Tube and Solid State.)
CROSSOVER: Adjustable 150Hz to 750Hz.
POWER: 120V AC, 50/60 Hz. POWER CONSUMPTION: 12 watts.
DIMENSIONS: D-10.5", W-19", H-1.75" (1 rack space.)
WEIGHT: 6 lbs. 8 lbs shipping.
OPTIONS: 220V AC, 50/60 Hz. Extended 3 year warranty.
OPTIONAL
ACCESSORIES: MC-1 MIDI Foot Controller, Phantom power cable.
Page 20 of 22
To Next Page
Loading...
