Ada Suite 7.1 HD User Manual

602-610 Mamaroneck Avenue, White Plains, NY, 10605, www.ada-usa.com, 1-800-HD-AUDIO, Fax (914) 946-9620
Suite 7.1 HD
Home Theater Controller
In s t a l l a t i o n Ma n u a l
Ve r s i o n 4.0 - Ju n e 2010

Ada Suite 7.1 HD Specifications

General

Brand	Ada
Model	Suite 7.1 HD
Category	Amplifier
Language	English

Summary

Safety Instructions & Electrical Warning

AC Connections

Power Amplifier & Powered Subwoofer Connections

Power On, Mute, Off, and Master Volume Control

Power On/Off and Mute Operations

Input Selector Operation

Mode Selector and Descriptions

Audio Mode Selection and Types

Custom Input Configuration Options

Setup Mode: Entering and Navigation

Front Panel Setup Navigation

Customizing Virtual Inputs

Input Labeling and Management

Audio Input Jack Assignment

Video Input Jack Assignment

Input Presets Configuration

Default Modes Configuration

Automatic Mode Detection

Loading Custom Input Configurations

Saving and Loading Configuration Files

Final Input Setting

Limiting Visible Inputs

Setup 1: Speaker Size and Crossover Frequency

Speaker Size and Crossover Settings

Explains speaker size settings and their impact on bass redirection to the subwoofer.

Setup 2: Speaker Level Calibration

SPL Meter and Pink Noise for Leveling

Details using an SPL meter and pink noise to balance speaker channel volumes accurately.

Setup 3: Delay Settings Configuration

Measuring Speaker Distances for Delay

Outlines measuring speaker distances from the listening position to calculate delay times.

Setup 4: Bass Limiter Function

Bass Peak Limiter Adjustment

Details how to engage and adjust the bass peak limiter range from OFF (0 dB) to -24 dB.

Setup 5: THX Settings

Boundary Gain and Speaker Spacing

Modes, DTS & THX Enhancements

Mode Management and Enhancements

Simulated Surround and Dynamic Range Settings

Customizing Simulated Surround Modes

Details customizing Stereo and Mono Enhance modes by adjusting attenuation and delay.

Dynamic Range Control

Dolby Pro Logic II Music and Custom Settings

Pro Logic II Parameters and Features

Reverb Mode Settings

Reverb Parameter Adjustments

Details adjusting reverb parameters like Size, Mix, LF Cut, Reverb Time, and Damping for each mode.

Maximum and Turn-On Volume Settings

Volume Presets and Maximum Level

Explains storing and recalling up to four volume presets and setting a turn-on volume preset.

Tone Settings Configuration

Bass, Treble, and Speaker Group Adjustments

Details adjusting bass and treble levels and frequency points for Group A and Group B speakers.

Parametric EQ (PEQ) Setup

PEQ Functionality and Presets

Describes the multi-band parametric equalizer, including bands, presets, and controls.

HDMI Equalizer Settings

Input and Output Equalizer Adjustments

Details compensating for HDMI cable length for inputs and adjusting output equalization.

Solo Test Feature

Speaker Diagnostics with Solo Test

Describes using the Solo Test to check for blown speakers or phase issues.

Saving and Loading Configurations

Input and PROM File Management

Factory and Installer Defaults

Default Setting Management

ADA Bus, IR, and Display Settings

Bus Address, Baud Rate, and IR Control

HEX Codes for System Integration

System Control HEX Commands