Need help?Do you have a question about the Adafruit Industries HTU21D-F and is the answer not in the manual?
General| Sensor Type | Digital Humidity and Temperature Sensor |
|---|---|
| Communication Interface | I2C |
| Operating Voltage | 1.5V to 3.6V |
| Temperature Accuracy | ±0.3°C (at 25°C) |
| Temperature Range | -40 to +125°C |
| Humidity Range | 0 to 100 %RH |
| Humidity Accuracy | ±2% RH |
| Response Time (humidity) | 8 seconds |
Details the VIN, 3V3, and GND pins for powering the sensor and its voltage regulator.
Explains the SCL and SDA pins required for I2C communication with the sensor.
Instructions for cutting and preparing the header strip for soldering to the breakout board.
Guide on positioning the breakout board over the header pins for soldering.
Steps for ensuring reliable electrical contact by soldering the pins to the board.
Steps to download the library and upload an example sketch to test the sensor.
Provides links to essential resources like datasheets, Fritzing objects, and PCB files.
Presents the circuit schematic diagram for the HTU21D-F sensor breakout board.
Displays the physical dimensions and layout of the sensor's printed circuit board.
To Next Page