must be unique for each device.)
This matches the example code we have written. Once you get this working, you can try
another set of pins.
Finally you can run
the File®® Sketchbook®® Libraries®® Adafruit_SSD1306®® SSD1306_128x32_SPI example
If you're using the 128x32 OLED, be sure to uncomment the "#define
If you're using the 128x32 OLED, be sure to uncomment the "#define
SSD1306_128_32" in the top of Adafruit_SSD1306.h to change the buffer size
SSD1306_128_32" in the top of Adafruit_SSD1306.h to change the buffer size
To Next Page