Adafruit SSD1306 - Wiring 128 x32 I2 C OLED Displays

To Next Page

To Previous Page

Wiring 128x32 I2C Display

128x32 I2C OLED

The 128x32 I2C OLED is very easy to get up and running because it has built in level shifting and

regulator. First up, take a piece of 0.1" header 6 pins long.

Plug the header long end down into a

breadboard

Place the OLED on top

Solder the short pins into the OLED PCB.

Industries

http://learn.adafruit.com/monochrome-oled-breakouts Page 16 of 22