Playing Sounds
The transpose function allows the overall pitch of the digital piano to be transposed up or down by a
maximum of one octave in semitone increments. The transpose range is from -12 to +12.
Transpose
1 Press the [TRANSPOSE] button.
Use the data dial, the [+] button or the [-] button to transpose the pitch.
The keyboard of the digital piano is equipped with a touch response feature that lets you dynamically
and expressively control the level of the voices played depending on your playing strength.
However, some instruments don't naturally have touch response, such as organs. In this case you can
turn off the touch sensitive function while you are playing.
Touch Sensitive
1 Press the [TOUCH] button.
The touch sensitive function will be
2 Play a note.
Effect
1 Press the REVERB or CHORUS buttons repeatedly to cycle through the various effects available.
Use the LEVEL[+] or the LEVEL[-] buttons to choose the level(s) of the effect(s).
Continue to press the REVERB or CHORUS buttons until their lights turn off to cancel their effect(s).
REVERB has 8 effects and CHORUS has 8 effects. Both of them can be activated at the same time.
2
3
4
06
NOTE: Each setting is indicated by the color of the TOUCH led light, RED=LIGHT, ORANGE=Normal,
GREEN=Heavy, OFF=No touch sensitivity. The Setting will also be displayed on the LCD screen.
TRANSPOSE
REVERB
CHORUS
TOUCH
,
To Next Page
Loading...
Need help?
General
