Adam Flame Effect - Changing The Bulb; Pebble Glow Fires

Customer telephone helpline: 08448 809301
Helpline email address: helpline@adamsurrounds.co.uk
CO9039 V3_151110
- 8 -
CHANGING THE BULB
Pebble Glow Fires
Please ensure that the electric fire is switched off at the mains and unplugged
before attempting to change the bulb.
Remove all pebbles before attempting to change the bulb.
3)
. Unscrew the pebble bed
panel.
4) Unscrew the old
bulb and repla
ce with
a Pebble Glow: 40W BC bulb (MAX)
2) Unscrew the fret
.
1) Remove the magnetized trim.
5
)
Replace the pebble bed, pebbles, fret and magnetized trim.
WARNING! Only replace the bulb with the same rated one (
40
W
BC
max.)
Due to their indeterminate life span, light bulbs are excluded from the guarantee.