Operating Instructions
8
Forced Lock
Outside Forced Lock Setting - PIN Code
Outside Forced Lock Setting - Card Key
Touch with palm
Contact Card Key for 3 seconds until you hear 3 beeps.
Inside Forced Lock Setting
Press and hold [#]
button for 3 seconds
Enter User PIN Code
∙ If compulsory external lock is set up, the door open/close button will not function. The alarm will go off if
someone tries to open the door by manually opening/closing the unit.
∙ To open the door by manually opening/closing the unit under compulsory external lock setting,
completely turn the knob within one second, or else the door will lock itself again.
Press and hold the open/close button for 5 seconds.
Press the ® Registration button or turn the manual
thumb turn while pressing buttons together.
Set
Release
To Next Page
Loading...
