ADAMS RITE 3090 - User Manual

1 80-0180-307, Rev A
eForce
®
150 Keyless Entry
Model 3090
Installation Instructions and User’s Guide

Summary

INSTALLATION

Important Notes

Key considerations for installation of specific models and compliance with codes.

Preparing the Door

Preparing the Spindle

Configuring the Model 3090 for Lock Series

Handing the eForce 150

Installing the Mortise Cylinder

Mounting the eForce 150

Installing the eForce 150 Batteries

SETTING UP AND USING THE eFORCE 150

Programming Information

User Code Descriptions

Emergency Code

Supervisor Code

Lockout Code

Passage Code

Features and Options Descriptions

Error Lockout

Programming the User Codes

Master Code

Step-by-step guide to program the Master Code (Location 1).

One Time User Codes

Reset Master Code

Emergency Code

Supervisor Code

Lockout Code

Passage Code

Programming Features and Options

Delete All User Codes

Delete Supervisor, Lockout, Passage, or a Single Normal User Code

Delete a Block of Normal User Codes

Reset All Features to Default Values

Set Number of Successive Invalid User Code Entries Accepted

Set Error Lockout Time

Set Hold-Open (Unlock) Time

Set Emergency Hold-Open (Unlock) Time

Replacing the eForce 150 Batteries

Replacing the Mortise Cylinder

TROUBLESHOOTING

Green light comes on, but lever will not retract latch-bolt.

Troubleshooting steps for latch bolt retraction issues.

No lights come on when pushbuttons are depressed.

Troubleshooting steps for issues with keypad illumination.

No tones sound when pushbuttons are depressed.

Troubleshooting steps for issues with audible keypad feedback.

Factory default codes not working.

User codes not working.

Operator stays unlocked.

WARRANTY

ADAMS RITE 3090 Specifications

General

Brand	ADAMS RITE
Model	3090
Category	Locks
Language	English