5 80-0180-307, Rev A
INSTALLATION
Important Notes
The 3090-01 is designed exclusively for latching hardware including:
• Adams Rite 4500/4900 deadlatches
• Adams Rite 8000 series exit devices
• Yale 7200 series narrow stile exit devices
• Corbin Russwin ED4000 series
The 3090-02 is compatible with Adams Rite MS
®
Series Deadbolts only!
These units are not interchangeable. These instructions, and the
fasteners supplied, apply to metal door applications. Other door types
will need fasteners designed for the given medium.
IMPORTANT: This product must be installed according to all
applicable building and life safety codes!
Tools and Equipment Needed
The following common hand tools are needed for installation:
• Center punch
• Drill gun
• 1/4” [6.35 mm] drill bit
• Phillips screwdriver
• Pliers
• Flat tip screwdriver
• Pencil
The following additional equipment is needed:
NOTE: 1-1/2” cylinders require a 1/8” trim ring.
• Mortise Cylinder - 1” to 1-1/2” in length range with MS cam
To Next Page
Loading...
