Adaptec Command Line Utility - Installing on Debian or Ubuntu Linux; Installing on Solaris; Installing on Freebsd

Chapter 1: Getting Started with the Command Line Utility ● 10
Installing on Debian or Ubuntu Linux
To insta l l ARCCONF on Debian or Ubuntu Linux:
1 Insert the Adaptec Installation DVD.
2 Mount the Adaptec Installation DVD:
mount /dev/cdrom /mnt/cdrom
3 Change to the Debian manager directory:
cd /mnt/cdrom/ASMCD/debian_x86_64/manager
4 Install the .deb package:
dpkg -i storman_6.50-15653_amd64.deb (for 64-bit systems)
5 Unmount the Adaptec Installation DVD:
umount /mnt/cdrom
Installing on Solaris
To install ARCCONF on Solaris systems:
1 Insert the Adaptec Installation DVD.
The DVD mounts automatically. (If it doesn’t, manually mount the DVD using a
command similar to the one shown below. Refer to your operating system documentation
for detailed instructions.)
mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt
2 Install Adaptec Storage Manager:
pkgadd -d/<mount point>/ASMCD/solaris_x86/manager/StorMan.pkg
3 Follow the on-screen instructions to complete the installation.
4 Eject or unmount the Adaptec Installation DVD. Refer to your operating system
documentation for detailed instructions.
Installing on FreeBSD
To install ARCCONF on FreeBSD systems:
1 Insert the Adaptec Installation DVD.
2 Mount the Adaptec Installation DVD:
mount /cdrom /mnt
Note: Your DVD-ROM drive may have a different device name or path.
3
Install Adaptec Storage Manager:
For FreeBSD for x86 (32-bit):
pkg_add /<mount point>/ASMCD/freebsd7/manager/StorMan-x86.pkg.tbz
For FreeBSD for amd64 (64-bit):
pkg_add /<mount point>/ASMCD/freebsd7_x86_64/manager/StorMan-amd64.pkg.tbz
where mount point is the DVD-ROM mount point.