Adaptec Command Line Utility - 2 Using the Command Line Utility; ARCCONF Commands; Arcconf Atapassword; Arcconf Copyback

Chapter 2: Using the Command Line Utility ● 18
ARCCONF Commands
Perform the following functions from the command line:
Note: In the online command syntax, <> indicates a required parameter and [] indicates an
optional parameter.
arcconf atapassword
Sets or clears the Secure Erase password for SATA drives. See arcconf setvmcredential on page 36
for more information about Secure Erase.
Syntax
ARCCONF ATAPASSWORD <Controller#> SET <new password> <Channel# ID#> ...
ARCCONF ATAPASSWORD <Controller#> CLEAR <current password> <Channel# ID#> ...
Parameters
new password|current password is the case-senstive password string.
Channel/ID lists the space-delimited channel number and device number (ID) pairs for each
drive on which to set or clear the password.
Examples
ARCCONF ATAPASSWORD 1 SET uR8ryx 0 1
ARCCONF ATAPASSWORD 1 CLEAR uR8ryx 0 1
arcconf copyback
Enables or disables the copyback feature, which attempts to keep drives in the original slot
order after rebuilds.
Syntax
ARCCONF COPYBACK <Controller#> <ON|OFF>
Parameters
Controller# is the controller number
On enables the copyback feature
ARCCONF COMMANDS
atapassword getsmartstats resetstatisticscounters setncq
copyback getstatus romupdate setperform
create getversion saveconfig setpower
datascrub identify savesupportarchive setpriority
delete imageupdate setalarm setstate
driverupdate key setcache setstatsdatacollection
failover modify setconfig setvmcredential
getconfig playconfig setmaxcache task
getlogs rescan setname