Adax NEO User Manual

27
GB/AU
x2
20°C
20°C
Canceling a period of temperature cutback
Hold down and press once on
or to override the current active
period, or the next period of tempera-
ture cutback. The lamp is lit steadily
for the period in question. Tempera-
ture cutback will resume as usual from
the subsequent period.
Temperature override
Selecting another temperature during
either a comfort or cutback period,
without storing it (by pressing for 5
seconds), will apply only to the current
period.
Change the temperature setting
(comfort or cutback)
When in the comfort or cutback
temperature mode, choose your new
comfort or cutback temperature by
pressing or .
Save the setting by pressing more
than 5 seconds.
Change the duration of temperature cutback
and/or the cutback temperature
Hold down on and press twice on
or . Release and h (hours) will
ash 3 times.
Using the or key select the
number of hours you want the cutback
to last.
Conrm by pressing key briey.
°C will ash 3 times and then the cur-
rent cutback temperature will ash.
With or key select the cutback
temperature.
Conrm by pressing key briey.
Permanently delete cutback function
To permanently delete a temperature
cutback function, press or until
the green lamp goes out.
Calibration
Should the actual room temperature
and Neo’s setting not correspond, Neo
should be calibrated.
First let the heater work at the same
temperature setting, preferably for
at least 24 hours, keeping doors and
windows closed. This makes certain
that Neo that is regulating room tem-
perature.
Hold down on and press once on
Release . ºC will ash 3 times and
the setpoint temperature will ash.
Press or until the display shows
the same as the actual measured room
temperature. Store by pressing for
5 seconds.
The heater will now work with the
temperature displayed by Neo and af-
ter a period this will correspond with
the actual temperature of the room.
This procedure can be repeated at a
later date to ensure correct calibration.
Reset the thermostat to factory default values
Nb! Reset is not possible if the thermostat display is in any ashing
mode.
After resetting, the thermostat has to
be reprogrammed according to the
instructions for your chosen mode.
Switch the heater OFF.
Hold in the key and then switch the
heater ON.
Hold the key in for more than 5
seconds until rE starts ashing in the
display.
Release and HO (Home Mode) will
ash.
You can select between modes HO, OF
(Ofce) and CA (Cabin) by pressing
the or keys.
Conrm your choice by pressing the
key for more than 5 seconds.
22 (°C) will ash. Select your pre-
ferred comfort temperature.
Conrm by pressing in the key for
more than 5 seconds.
If you do nothing, 22 (°C) will auto-
matically be stored after 7 seconds.
Child lock
To lock: Press and at the same
time until you see - - in the display.
To unlock: Press and at the same
time until you see - - disappear in the
display.
If you have rst pressed to change
the daytime cutback settings, d will
now ash three times and a random
number is displayed. Use the or
key to select the correct day (Monday
= 1, etc.). Conrm by pressing
briey.

Adax NEO Specifications

General

Type	Electric heater
Power Output	2000W
Color Options	White, Black
Installation	Wall-mounted
Voltage	230V
Frequency	50Hz
Safety Features	Overheat protection
Features	Child lock