Adax NEO - Calibration; Reset the thermostat to factory default values

31
GB/AU
20°C
20°C
Selecting a new cutback temperature setting
When cutback temperature is ongoing,
select the new cutback temperature
you desire by pressing or .
Save the setting by pressing more
than 5 seconds.
When the temperature cutback period ends
At the time the frost-safe period ends,
the comfort temperature setting will
ash to indicate the need for action.
Press any key to make the comfort
temperature display steadily and that
temperature will now continue.
If you do nothing while the display is
ashing, another frost-safe period will
start automatically after 48 hours.
Cancelling a frost-safe period
To end an ongoing frost-safe period,
press for more than 5 seconds.
Calibration
Should the actual room temperature
and Neo’s setting not correspond, Neo
should be calibrated.
First let the heater work at the same
temperature setting, preferably for
at least 24 hours, keeping doors and
windows closed. This makes certain
that Neo that is controlling room
temperature.
Hold down on and press once on
Release . ºC will ash 3 times and
the setpoint temperature will ash.
Press or until the display shows
the same as the actual measured room
temperature. Store by pressing for
5 seconds.
The heater will now work with the
temperature displayed by Neo and af-
ter a period this will correspond with
the actual temperature of the room.
This procedure can be repeated at a
later date to ensure correct calibration.
Reset the thermostat to factory default values
Nb! Reset is not possible if the thermostat display is in any ashing
mode.
After resetting, the thermostat has to
be reprogrammed according to the
instructions for your chosen mode.
Switch the heater OFF.
Hold in the key and then switch the
heater ON.
Hold the key in for more than 5
seconds until rE starts ashing in the
display.
Release and HO (Home Mode) will
ash.
You can select between modes HO, OF
(Ofce) and CA (Cabin) by pressing
the or keys.
Conrm your choice by pressing the
key for more than 5 seconds.
22 (°C) will ash. Select your pre-
ferred comfort temperature.
Conrm by pressing in the key for
more than 5 seconds.
If you do nothing, 22 (°C) will auto-
matically be stored after 7 seconds.
Child lock
To lock: Press and at the same
time until you see - - in the display.
To unlock: Press and at the same
time until you see - - disappear in the
display.