MIKADO USER MANUAL
www.adblighting.com
User Manual - page 25
Issue 1.0
In a typical operation, the current look is created on any of the channel faders or submasters.
To enable the next look to be created, take a "Grab" of the output [record memory], [F/ A]
(GRAB), fade up the Grab Master to full and then fade down the Preset Masters. The look on
stage is maintained by the Grab Master. Preset the next look using any of the channel faders
or submasters. To crossfade to the next look, simply fade up the Preset Masters and fade
down the Grab Master. In order to create the next look, "Grab" the current look in the Grab
Master, fade it up to full and then fade down the Preset Masters. As before, create the next
look "blind" on the channel faders or submasters.
You may continue to "Preset" and "Grab" for every new look that you require.
To Next Page
Loading...
