Need help?Do you have a question about the ADB L-852D and is the answer not in the manual?
General| Category | Lighting Equipment |
|---|---|
| Lamp type | LED |
| Frequency | 50/60 Hz |
| Weight | Typically 5-7 lbs |
| IP Rating | IP65 |
| Lifespan | 50, 000 hours |
Product compliance with essential safety and hygiene requirements.
Product compliance with safety and FAA Airfield regulations.
Warranty for electrical and mechanical defects of LED products.
Warranty for mechanical, electrical, and physical defects.
ADB's commitment to repair or replace defective equipment per guarantee.
ADB disclaims responsibility for non-standard or unintended uses of equipment.
Explains warning, danger, and caution icons used in the manual.
Defines qualified personnel for safe operation and maintenance.
Lists relevant standards and specifies intended use for safe operation.
Emphasizes using correct fasteners to prevent Foreign Object Damage (FOD).
Guidelines for operating and storing equipment safely.
Cautions for handling electrostatic sensitive devices and heavy equipment.
Procedures for malfunctions and safety warnings for maintenance.
Explains the manual's purpose, structure, and how to use it.
Lists revisions made to the manual with dates and descriptions.
Details FAA/ICAO compliance and specific uses for L-852 models.
Specifies operating limits and packaging details for the fixture.
Details fixture compatibility with transformers and power requirements.
Explains available unidirectional, bidirectional, and switchable configurations.
Illustrates inner pan assembly and optical units for different models.
Details precise placement, mounting, and fastener requirements for installation.
Covers cord-set protection, transformer connection, and current verification.
Outlines the step-by-step process for installing fixtures.
Covers safety, unpacking, coding, and necessary tools for installation.
Illustrates the components of a snow plow ring assembly.
Provides guidance for installing fixtures on shallow bases.
Specific requirements for installing fixtures on load-bearing L-868 bases.
Additional details on shallow base installation and torque.
Provides a maintenance schedule and general procedures for ITCF fixtures.
Specific tasks for cleaning, retorquing bolts, and removing the optical unit.
Step-by-step guide to open the optical unit for inspection or repair.
Detailed procedure for replacing a broken or scarred prism.
Steps for replacing the prism-keeper plate and reconnecting the circuit board.
Procedure for testing LED assemblies using a Fluke 87 meter.
Steps for removing and installing a new LED assembly.
Procedure for unplugging, removing, and installing a new cord set.
Diagrams and instructions for wiring power supplies, heaters, and thermostats.
General guidance and requirements for installing in-pavement fixtures.
Lists relevant documents and describes different mounting systems.
Specific requirements for installing fixtures on load-bearing L-868 bases.
Guidance on using ceramic bolts, including warnings and torque specifications.
Requirements for installing on non-load-bearing L-867 bases, including bolt types.
Mandatory schedule for checking fixture bolt torque and condition.
Schematics and part numbers for various F-Range types.
Table of spare parts, figures, and notes for maintaining IRGL units.
To Next Page
