L-852A-D, J & K ITCF, F-Range, ICAO LED Taxiway Centerline Light
96A0460 Rev. C
L-868 base can installation (load bearing)
© ADB Airfield Solutions All Rights Reserved38
3.2.1 Use of Ceramic Bolts Refer to FAA Engineering Brief 83 (In-pavement Light Fixture Bolts) for guidance on use of
fluoropolymer metallic-ceramic coated SAE J429 Grade 2 carbon steel bolts.
WARNING
Read installation instructions in their entirety before starting installation.
— Do not use an impact type of torque wrench to tighten ceramic bolts.
— Do not torque ceramic bolts to 500 in-lbs. (56.5 N·m). Do not use anti-
seize or threadlocking compounds with ceramic bolts. Tighten to the
bolt manufacturer’s recommendation.
Failure to follow these warnings may result in serious injury or
equipment damage.
To Next Page
Loading...
