ADC ECOWASH-MP2 - Main Programming Menu; Program Name; Create Name; Copy Name

113688-1 25
4.2 MAIN PROGRAMMING MENU
After turning the machine on, press the INFO key:
→DELAYED PROGRAMMING
PROGRAMMING
CONFIGURATION
MAINTENANCE
Press DEC (
∨∨
∨∨
∨) twice followed by ENTER to access the
main programming menu:
→PROGRAM NAME
CYCLE NAME
BLOCK PROGRAM
4.3 PROGRAM NAME
After pressing the ENTER key we have three options:
→CREATE NAME
COPY NAME
CHANGE NAME
4.3.1 Create name
This command allows us to create the program name.
The steps to follow are the following:
 After selecting CREATE NAME, press the ENTER
key:
CREATE NAME
Program name A
 Use the INC (
∧∧
∧∧
∧) and DEC (
∨∨
∨∨
∨) keys to modify the
character indicated by the cursor; and the ADVANCE
(>>) key to move the cursor to the next character; use
the INFO key to change from upper to lower case and
to special characters. Once the name has been written,
press ENTER.
Save name?
ENTER: Accept / ESC: Cancel / <<: Previous menu
4.3.2 Copy name
This command allows for copying the name of a
program from another existing one. The steps to follow
are the following:
 After selecting COPY NAME, press the ENTER key
and the first name saved in the memory will be displayed.
Save name?
COPY NAME
Program name
WHITES 90 °C
 The INC (
∧∧
∧∧
∧) and DEC (
∨∨
∨∨
∨) keys display all the names
saved in the memory. Once the name has been
selected, press ENTER. It is now possible to change
the name; after changing press ENTER.
ENTER: Accept / ESC: Cancel / <<: Previous menu
4.3.3 Change name
This command allows for modifying the name of a
program amongst those created by the user. The steps
to follow are the following:
 After selecting CHANGE NAME, press the ENTER
key and the first available name will be displayed. For
example:
CHANGE NAME
Program name
BLANKETS
Save name?
 With the INC (
∧∧
∧∧
∧) and DEC (
∨∨
∨∨
∨) keys, the name to be
modified is selected. Press ENTER to validate the
selection.
 Use the INC (
∧∧
∧∧
∧) and DEC (
∨∨
∨∨
∨) keys to modify the
character indicated by the cursor; use the ADVANCE
(>>) key to move the cursor to the next character. Once
the name has been modified, press ENTER.
ENTER: Accept / ESC: Cancel / <<: Previous menu
4.4 CYCLE NAME
After pressing the ENTER key we have three options:
4.4.1 Create cycle name
This command allows for the creation of a cycle name.
The steps to follow are the following:
 After selecting CREATE CYCLE NAME, press the
ENTER key:
CREATE CYCLE NAME
COPY CYCLE NAME
CHANGE CYCLE NAME