113688-1 31
Pre-wash
ENTER: Accept / ESC: Cancel / <<: Previous menu
When all changes have been completed press ESC.
Save program?
BLANKETS
If you wish to return to the previous menu you should
press the << key.
4.6.7 Erase program
This command allows for erasing any program created
by the user. The steps to follow are the following:
After selecting ERASE PROGRAM, press the ENTER
key and the name of the first erasable program saved
in the memory will be displayed.
ERASE PROGRAM
Programme: 17
BLANKETS
Use the INC (
∧∧
∧∧
∧) and DEC (
∨∨
∨∨
∨) keys to view all erasable
programs. Once the program has been selected, press
ENTER.
Erase program
ENTER: Accept / ESC: Cancel / <<: Previous menu
To Next Page
Loading...
