55
Weather Station with Wireless Outdoor Sensor WS 1822
English
Use additional wireless sensors
The base station is supplied with a wireless sensor.
However, you can operate it with up to three outdoor
sensors. For more information or priced order please use
the following email address: service@ade-germany.de.
The outdoor sensors can be situated in different
spaces or outdoors.
Every sensor must be allocated its own number (= no.
of the transmission channel).
Procedure:
1. Place the base station and wireless sensors close
together.
2. Remove the battery compartment cover on the rear
side of the outdoor sensor.
3. For each outdoor sensor, set a unique channel using
the switches. Sensor included in delivery uses by
default channel 1, so select channel 2 for the second
and channel 3 for the third sensor.
4. Insert two batteries of the type indicated on the base.
Pay attention to the correct polarity (+/-).
5. Put the battery compartment cover back in place.
6. Using the CH button, select the corresponding outdoor
sensor (1, 2 or 3) in order to have its data displayed.
7. Using the CH button, select the
corresponding outdoor sensor (1, 2 or 3) in
order to have its data displayed.
FW Station WS 1822 3 Sprach.indb 55 21.06.2018 15:34:00
To Next Page
Loading...
