65
Weather Station with Wireless Outdoor Sensor WS 1822
English
Fault/Remedy
Fault Possible cause
The DCF77 signal for the
time cannot be received.
Check the chosen
location.
Start the signal reception
manually, if necessary.
Adjust the time manually.
The temperature
information of the
sensor seems too high.
Check whether the sensor
has been exposed to
direct sunlight.
Instead of showing
the measured values
for temperature or
humidity, the display
shows H.HH or LL.L.
The values lie above or
below the measurement
range.
The temperature
indicator is blinking on
the display.
The temperature alarm
has tripped; see chapter
“Temperature alarm”.
The indicator is illegible,
the function is unclear,
or the values are
obviously false.
Remove the batteries for a
few moments.
FW Station WS 1822 3 Sprach.indb 65 21.06.2018 15:34:01
To Next Page
Loading...
