ADE WS 1822 - Page 61

61
Weather Station with Wireless Outdoor Sensor WS 1822
English
Setting temperature range.
1. Only if you have several wireless outdoor sensors are
connected with the base station: Using the button,
select the desired sensor (mind the channel indication).
2. Press and hold down the ALERT button until the upper
value flashes on the display.
3. Use the
/ buttons to set the upper temperature
limit.
4. Press ALERT in order to save the entry.
5. Use the
/ buttons to set the lower temperature
limit.
6. Finally, press ALERT.
The process is complete and the temperature
alarm is active. You will recognise the symbol
shown on the left, which appears in the lower
part of the display.
Disabling/enabling temperature alarm
− Press ALERT once briey to disable or enable the
temperature alarm
Once the temperature range has been
reached, warning beeps will sound and the
symbol and temperature display will flash.
 first 3 warning beeps
 then 5 warning beeps each minute
FW Station WS 1822 3 Sprach.indb 61 21.06.2018 15:34:00