64
WS 1911 weather station
No data display from the wireless outdoor sensor
1. Check whether you have inserted the batteries
correctly.
2. Check whether the location of the outdoor sensor is
suitable, see “Choosing a location”.
3.
Press and hold
to manually start signal reception
to the outdoor sensor.
Setting the time and date manually
If there is more than approx. 30 seconds between
two pushes of a button, the setting process
automatically ends and you will have to repeat it.
1. Keep the
button pressed until the radio tower
symbol and “ON” or “OFF” flash on the display.
2. Use the
or button to set the automatic reception
of the time signal transmitter to “ON” (recommended).
3. Press
in order to save the settings. On display “00”.
4. Proceed as previously described.
− Press
to save a setting.
− Press the
or button to set the desired value.
5. Carry out the following settings:
− Time zone you are in (for mainland Europe, select 00)
− 24- or 12-hour display
− Hours
− Minutes
To Next Page
Loading...
