81
WS 1911 weather station
English
The projection display consists of the time of day and
the indoor and outdoor temperature, with the display
changing every 5 seconds. The outdoor temperature
(channel 1-3) always shows the value that is shown on the
display at the same time.
If you press and hold down for more than
3 seconds, you can decrease or increase the
brightness of the projection.
When data is received from the time signal
transmitter, the projection is automatically
interrupted to avoid reception interference.
Other functions
Display illumination
− Select the desired display brightness by repeatedly
pressing
.
− Press
to maximally illuminate the display for
approx. 15 seconds.
When data is received from the time signal
transmitter, the display illumination is
automatically interrupted to avoid reception
interference.
Change temperature unit
− Press to switch between degrees Celsius (°C) and
degrees Fahrenheit (°F).
To Next Page
Loading...
