79
WS 1911 weather station
English
8. Press .
“05” (= default setting 5 minutes) and “Z
z
” flash on the
display.
9. Use the
or button to set the desired time span for
the snooze function (time span between two alarms). If
you select “OFF”, the snooze function is switched off.
10. Press
.
11. Proceed as described to make the same settings for
ALARM2. If you do not want to set a second alarm time,
simply press
repeatedly until the normal display is
shown again.
Switching the alarm function on/off
− Slide the ALARM1 or ALARM2 switch or both on the
back of the device to ON.
The display shows “M-F” or “S-S” or “M-F” and “S-S”
accordingly.
The alarm function is activated.
To deactivate an alarm function, slide the
respective switch to OFF.
Waking up
At the set time, you will be woken by an alarm signal, which
will become more intense as the waking time increases.
To Next Page
Loading...
