68
WS 1911 weather station
Setting up the outdoor sensor
DANGER of severe injuries
− During wall installation, there must be
no electrical cables, gas or water pipes
installed in the walls at the mounting site.
Otherwise, when drilling holes, there is a
risk of electric shock!
The wireless outdoor sensor is equipped with a hanging
eyelet on the rear side.
− Place or hang the outdoor sensor at a position where
it is protected from the direct inuence of the weather
(rain, sun, wind, etc.). Suitable locations are, for
example, under an awning or in a carport.
Use additional wireless sensors
The base station is supplied with a wireless sensor. However,
you can operate it with up to three outdoor sensors.
Please contact service@ade-germany.de for more
information or a paid order.
The outdoor sensors can be situated in dierent
spaces or outdoors.
Every sensor must be allocated its own number
(=no.of the transmission channel).
The standard sensor included in the scope of delivery
always has channel number 1. This number is fixed
and cannot be changed.
To Next Page
Loading...
