ADEEPT Ultimate Sensor Kit for Raspberry Pi - Page 138

For C language users:
Step 2: Edit and save the code with vim or nano.
(code path: /home/Adeept_Sensor_Kit_for_RPi_C_Code/36_thermometer_1)
Step 3: Compile
$ sudo ./build.sh
Step 4: Run
$ sudo ./main
For Python users:
Step 2: Edit and save the code with vim or nano.
(code path: /home/Adeept_Sensor_Kit_for_RPi_Python_Code/36_thermometer_1/)
Step 3: Run
$ sudo python main.py
Now you can see the temperature shown on the segment display.