Adexa DWASH50 - TRANSPORTATION AND INSTALLATION

5 / 17
5. TRANSPORTATION AND INSTALLATION
During transportation, take necessary precautions against the risk of falling down and being turned upside down for the
product.
Place the product onto a flat and solid ground.
Do not install the product near the flammable and explosive materials and do not keep any flammable and explosive
material near the furnace, while it is working.
Keep surely a fire extinguisher near the furnace and check whether the periodical checking of the fire extinguisher has
been implemented or not.
MODEL
DW500 (NP)
CAPACITY
PLATES
60’
540
BASKET
BASKET FOR 16 PLATES
GLASS-CUP BASKET
50X50
50X50
n
n
1
1
ELECTRIC
VOLTAGE
WASHING TANK HEATER
RINSING WATER HEATER
MAXIMUM POWER
MAIN SUPPLY CABLE
V
W
W
W
mm²
220-230 AC V, 3~ N , 50Hz
2500
4500
5000
3X2.5 RNF TYPE
FEED WATER
WATER INLET PRESSURE
WATER HARDNESS
WATER INLET TEMPARATURE
WATER INLET CONNECTOR DIAMETER
WATER INLET CONNECTOR DIAMETER DRAINAGE HEIGHT
bar
ºFr
ºC
Ø
Ømm
cm
2-4
15
45-50
¾”
32
35
WASHING
TEMPARATURE
WASHING TANK CAPACITY
WASHING PUMP
WASHING DURATION
ºC
It
HP
50-55
29
0,55
2 Min
RINSING
TEMPARATURE
RINSING WATER CONSUMPTION
LENGTH
WIDTH
HEIGHT
GROSS WEIGHT
VOLUME
ºC
It/basket
cm
cm
cm
kg
m³
80-85
2,5
60
60
83
67
0.42