9 / 17
Have the detergent firm dosing apparatus to supply polisher into your machine connect.
Check the water supply hose and water drainage connection.
Fix overflow pipe into its place.
Open the valve of pressured hot water supply.
Place the basket, in which you place the things to be washed, in machine.
Shut the door of the machine.
Press ON/OFF switch (A). The machine takes the water inside and begins heating the water. The Water Temparature Indicatory Lamp
turns on when water temparature is ready.
Wait until this lamp turns on.
Press Cycle Start Push Button (B) throught three seconds. The machine will start the washing cycle.
The washing keeps proceeding while “It’s washing” lamp keep turned on and the lamp will turned off after the washing cycle finish.
After a working day, to drain the water manually from machine; (only for the model DWASH50DP)
- Turn off the machine by pressing ON/OFF switch(A)
- Open the door
- Take off the drain pipe and keep the door open.
- And press Drain Pump Switch (D). During you keep pressing the switch, the machine will drain the water from the machine manually.
Washing time: 1. Programme : 120 sec.
CONTROL PANEL
Full automatic washing cycle at 55 C with a choice of three different programs from 1 to 2 minutes.
A – MAIN SWITCH (0-1)
B- CYCLE START PUSH BUTTON
C- MANUAL RINSE PUSH BUTTON
D- DRAIN PUMP SWITCH
To Next Page
Loading...