6. Do not use jet water to clean the machine. Water is conductive and may cause electric shock or
damage due to leakage.
7. Avoid striking, patting, or placing goods on the oven, as improper use can cause damage.
8. Do not touch the oven while it is in operation, as the high temperature can cause burns.
9. Disconnect the power supply immediately during thunderstorms to prevent damage to the
product.
10. Do not use hard or sharp objects on the control panel to avoid damage.
11. This oven is designed exclusively for food baking. Any other use is inappropriate and unsafe.
12. Always turn off the power switch after use.
13. Maintenance should only be performed by qualified service personnel. It is dangerous for
untrained individuals to attempt repairs.
14. If the power cord is damaged, it must be replaced by the manufacturer, authorized service
personnel, or a qualified technician to avoid hazards.
4. Operating Instructions
1. Check Power Supply: Before using the oven, ensure the power supply is properly connected and
that the supply voltage matches the voltage specified for the oven.
2. Temperature Range: The operating temperature of the oven is between 20°C and 300°C. Adjust
accordingly for your cooking needs.
3. Food Placement: Maintain at least a 4 cm gap between food trays inside the oven.
Do not overload each tray with food to allow for proper hot air circulation and even cooking.
Timer-Lamp
4. Time Control Operation (Power Switch)
• The timer can be set for a duration between 0 and 120 minutes.
• To set the timer, rotate it clockwise to the desired time. The timer light and the oven chamber
light will turn on, indicating the oven is operating.
• The timer will count down automatically in a counter-clockwise direction.
• When the set baking time is complete, the timer will return to the zero position, and the power
will automatically turn off. An alarm will sound for five seconds, and the timer light will
switch off.
• The cooking time depends on the type and quantity of food. Larger quantities may require
more time.
Upper Heating Light
5. Upper Heating Operation
• The upper heating function is controlled by both the upper heating thermostat and the timer.
• Rotate the timer knob clockwise to set the desired duration.
• Turn the thermostat knob clockwise to set the required temperature (temperature range: 0°C
To Next Page
Loading...