Industrial Electronic Devices
ADFweb.com S.r.l.
Document code: MN67044_ENG Revision 2.100 Page 11 of 37
Figure 2: Main window for
USE OF COMPOSITOR SW67044:
To configure the Converter, use the available software that runs with Windows called SW67044. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67044, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
To Next Page
Loading...
