Industrial Electronic Devices
ADFweb.com S.r.l.
Document code: MN67044_ENG Revision 2.100 Page 15 of 37
In the field “Node State value when slave device is not present” it is possible to insert the value to assign to the “Node State”
register when the converter doesn’t find the interrogated M-Bus slave;
If the field “Use Fic C Field” is checked, it is possible to define a fixed C field in the M-Bus requests sent to the M-Bus meters;
If the field “Reply with Exception Until First Read” is checked, the converter sends back the exception code 0x0B if the M-Bus
meters don’t reply at least one time. After the first reading, the converter gives back the last data read from the M-Bus meters (only
for “Cyclic” mode).
To Next Page
Loading...
