Industrial Electronic Devices
ADFweb.com S.r.l.
Document code: MN67044_ENG Revision 2.100 Page 21 of 37
If the field “Force Integer 32” is checked the Converter maps the variables with a dimension <32 bit in two consecutive Modbus
registers as a 32 bit variables;
In the field “Post Operation” it is possible to define an operation on the data read before mapping them on Modbus registers.
In the field “Position” insert the number of the variable that you want on Modbus.
Having completed this fields, to add the variable the button “ADD VARIABLE” must be pressed.
In order to modify a created variable it is necessary to select the desired variable, change the wrong items and then press the “MODIFY
VARIABLE” button.
To Next Page
