Industrial Electronic Devices
ADFweb.com S.r.l.
Document code: MN67912_ENG Revision 1.000 Page 18 of 30
In the field “Params” the parameters for the commands are defined;
In the field “Position” the starting byte of the PROFINET array where mapping the HART data is defined;
In the field “Swap” the bytes’ order is reversed;
In the field “Conv Int” the data from HART device is converted in Integer format;
In the field “Operations” a post-operation on the data read is defined;
In the field “Mnemonic” a description of the variable is defined.
Note:
In order to configure the HART devices and their variables, it is possible to scan the HART network and get the data automatically. It
is enough to click on “Scan” button. See page 22 for more info.
To Next Page
Loading...
