Industrial Electronic Devices
ADFweb.com S.r.l.
Document code: MN67912_ENG Revision 1.000 Page 13 of 30
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s
configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “PROFINET / HART Master” in order to
configure another device in the same manner, it is necessary to maintain the folder
and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.
To Next Page
Loading...
