Need help?Do you have a question about the ADIMLab Gantry and is the answer not in the manual?
General| Layer Resolution | 0.05 - 0.3 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Power Supply | 24V |
| Frame Material | Aluminum |
| Connectivity | USB, SD Card |
| Printing Technology | FDM |
Outlines the fundamental steps involved in the 3D printing process.
Explains methods for creating or obtaining 3D models, including design and download.
Details the process of slicing a 3D model into printable layers (G-code).
Illustrates and labels the main components of the ADIMLab-gantry 3D printer.
Provides instructions for assembling the printer and connecting its components.
Guides through initial functional tests after assembly, including homing and heating.
Covers essential pre-print preparations like axis calibration and bed leveling.
Instructions on copying the necessary control software package to your computer.
Step-by-step guide for installing the Repetier-Host control software.
Configuration steps for Repetier-Host, including printer parameters.
Configuration of Slic3r for slicing, including print, filament, and printer settings.
Common methods for acquiring 3D models, including file formats.
Detailed steps for slicing a 3D model using software and preparing it for printing.
Procedure for loading filament into the printer.
Explanation of online vs. offline printing methods.
Steps to follow after the printing process is completed.
Instructions for replacing filament under normal conditions.
Guide on how to change filament while a print is in progress.
Procedures for pausing an ongoing print and resuming it later.
Steps to abort a print job.
Explanation of the filament run-out detection feature.
How to adjust the nozzle and bed temperatures during operation.
Method for adjusting the print speed.
Troubleshooting guide for common issues encountered with the printer.
Specific advice on protecting the printer's heating components.
To Next Page
