ADIMLab Gantry - Assembly and Wiring; Initial Printer Tests

11
4.2Assembly and wiring
（Please reference SD card file contents“2.Assembly and debugging
tutorial”“HCmaker7Assembly instruction”1~2）
4.3 First time test the maker7
（Please reference SD card file contents“2.Assembly and debugging”
“HCmaker7Assembly instruction”3）
4.3.1 Home test：
(1) “Info screen” Press the knob，Rotate select“Prepare”，
Click OK：
(2) Select“Auto home”in Submenu，Click OK：
Normal，The three axes will return to the home position (lower
left corner)。