17
五、Slice software installation and configuration
5.1 Software copy
Insert the SD card into the computer, SD card file "4. control software,
Repetier-Host installation and introduction", there are various systems
Repetier-Host control software installation package, You can copy the
required installation to your computer.
5.2 Install control software（Take Win7 operating system as an
example）
(1) Please unzip the downloaded “setupRepetierHost_1_6_2.exe”，and
then follow the prompts to complete the installation. (refer to SD card
data4. control software Repetier-Host installation and introduction
(when installed, pay attention to the two that do not need to hook,
otherwise some of the network cannot connect wire to install.)
To Next Page
Loading...
