ADJ 12P HEX IP - Information and Advanced Modes

25
OPERATING INSTRUCTIONS
Time Information:
1. Access the main menu and press the UP or DOWN buttons until “Menu Info” is displayed, and
then press ENTER.
2. Press the UP or DOWN buttons to scroll through the different information menus. Press ENTER
to access your desired menu and view the desired information.
• “Time Info” - This will display information related to unit run time.
• “Temp Info” - This will display the current running temperature
• “Model Inf” - This will display the model name.
• “Error Inf” - This will display any error information.
3. If selecting the “Time Info” option, the unit will present a number of sub-options to choose from.
Use the UP and DOWN buttons to scroll through these sub-options, and press ENTER to select
and view the desired information.
• “Time Info Current” - This will display the current running time of the xture in hours.
• “Time Info Total Tim” - This will display the total running time of the xture in hours.
• “Time Info Last Clea” - This will display the last time the running time was cleared.
• “Time Info Timer PIN” - This menu function will allow you to clear the running time.
Secondary Setting: Set the unit as a “Secondary” in Primary/Secondary conguration.
1. Access the main menu and press the UP or DOWN buttons until “Secondry” is displayed, and
then press ENTER.
2. The unit is now set as a “Secondary” in a Primary-Secondary conguration.
Manual Control: Manually adjust all colors to create a custom color.
1. Access the main menu and press the UP or DOWN buttons until “Menu Manual” is displayed, and
then press ENTER.
2. Press the UP or DOWN buttons to scroll through the different manual control parameters. Press
ENTER to select a parameter, then use the UP and DOWN buttons to make adjustments.
3. Once you have made your desired adjustments, press ENTER to conrm.