ADJ RGB 3C IR - User Manual

Rev. 5/15
User Instructions
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
RGB 3C IR

Summary

General Information and Instructions

Unpacking and Introduction

Details on unpacking the RGB 3C IR, initial setup, and its features as a 3-channel RGB LED controller.

Customer Support and Product Registration

Information on obtaining customer support, warranty service, and online product registration procedures.

Product Features Overview

Lists key features of the RGB 3C IR, including static colors, RGB faders, program modes, and remote compatibility.

DMX Setup and Cable Requirements

DMX-512 Protocol and Linking

Explains the DMX-512 protocol, how to link fixtures, and requirements for DMX data transmission.

Data Cable Specifications

Details requirements for 3-pin XLR DMX data cables, including recommended types and construction.

Line Termination for DMX

Provides a special note on using line terminators to avoid erratic behavior in longer DMX cable runs.

5-Pin XLR DMX Connector Conversion

3-Pin XLR to 5-Pin XLR Conversion Chart

A chart detailing the proper conductor conversion for using 5-pin DMX cables in a 3-pin DMX line.

Controls and Functions Overview

Front Panel Controls

Description of front panel buttons like STATIC COLOR, AUTO PROGRAM, SOUND ACTIVE, BLACKOUT, and MIC.

Rear Panel Connectors

Identifies rear panel connectors including DMX OUT, DC INPUT, and IR RECEIVER SENSOR INPUT.

Operating Modes Explained

Instructions on how to operate the unit in Sound Active, Auto, Program Select, and Color modes.

Fader Functions and Remote Control

R;PROGRAM SELECT FADER Programs

Details the program selection function of the R/PROGRAM SELECT FADER and its associated programs.

G;PROGRAM SPEED FADER

Explains the dual function of the G/PROGRAM SPEED FADER for program speed and green LED intensity.

B;STROBE;SOUND SENSITIVITY FADER

Describes the functions of the B/STROBE/SOUND SENSITIVITY FADER for strobe, speed, and sound sensitivity.

ADJ LED RC2 Remote Functions

Details functions of the ADJ LED RC2 remote, including BLACKOUT, HOLD, and mode selection.

ADJ LED RC2 Control Operation

Remote Control Flash Function

Instructions on using the FLASH button on the remote for strobing and adjusting flash rate.

Product Specifications

Technical Specifications List

Provides detailed technical specifications including power, output, dimensions, weight, and warranty.

Manufacturers Limited Warranty

Warranty Terms and Conditions

Details the limited warranty for ADJ products, including purchase requirements and service procedures.

Warranty Period Guidelines

Outlines the specific limited warranty periods for different product categories like lighting and LED products.

ADJ RGB 3C IR Specifications

Power

power supply	DC 9-12V, 300mA min.
power consumption	3.6W

Connectivity

output	3-Pin XLR
audio trigger	Built-In Microphone

Weight and Dimensions

dimensions	220mm(L) x 140mm(W) x 63mm(H)
dimensions (imperial)	8.75” (L) x 5.5” (W) x 2.5” (H)
weight	0.8 Kgs